EN
Sve kategorije

Industry News

Početna>vijesti>Industry News

Primjena hepa filtera otpornog na visoke temperature

Time: 2022-07-13

Otporan na visoke temperaturehp filter is a partition structure, using high temperature resistant glass fiber or ultra fine glass fiber filter paper, aluminum foil partition, stainless steel outer frame, special high temperature resistant sealant sealing assembly, each unit is strictly tested, high temperature resistant filter is mainly used in ultra clean oven, ultra clean cleaning machine, chemical industry and other equipment and systems that require high temperature air purification.

The otporan na visoke temperature hp vazdušni filter is assembled with glass fiber or ultra-fine glass fiber filter paper, aluminum foil spacer, stainless steel outer frame and special high-temperature resistant sealant. The filter material is folded 180° on both sides to form a wedge-shaped pleated layer. The filter material is bent with two indentations so that it opens into a wedge-shaped box pleated layer at the end of the spacer.

SFFILTECH otporan na visoke temperaturehp air filters are used in the following places.

1,Aerospace, electronics, semiconductor, wafer, biopharmaceutical, hospital, food processing and other high cleanliness occasions.

2,Terminal of air conditioning and ventilation system (end filtration and hot air type high temperature oven, oven)

3,hospital operating rooms, hospitals, biopharmaceuticals, laboratories, circuit boards, microelectronics, optics, LED photoelectricity, QS food processing or purification equipment end temperature higher requirements of clean working environment.

Otporan na visoke temperature hp Filter materijal:

The filter material is ultra-fine glass fiber filter paper, sealant is red silica gel (250~280℃) and ceramic glue (350~400℃), frame material below 250℃ can choose aluminum plate, galvanized iron, stainless steel, above 250℃ must choose galvanized iron frame or stainless steel frame. Separator 0.035mm thick, choose aluminum foil sealing tape and silica gel plate (250 ~ 280 ℃). Polytetrafluoroethylene tape (350 ~ 400 ℃) the use of the maximum temperature of 250 ~ 280 ℃ or 350 ~ 400 ℃. When using the maximum humidity of 80%, the aluminum material can be selected with the thickness of 120~220mm.

The parameters of visoke temperature hp vazdušni filter are described as follows.

SFFILTECH's products are suitable for:

1,aerospace, electronics, semiconductors, wafers, biopharmaceuticals, hospitals, food processing and other high cleanliness occasions.

2,Terminal of air conditioning and ventilation system.

3,hospital operating rooms, hospitals, biopharmaceuticals, laboratories, circuit boards, microelectronics, optics, LED photoelectricity, QS food processing or purification equipment end of the higher temperature requirements of clean working environment.


Blog