Stainless steel multi-bag bag filter type?
Stainless steel bag filter is a kind of professional liquid filtration equipment, it can effectively remove different sizes of particles in the liquid, so as to achieve the purpose of liquid filtration, purification, separation, recovery. Bag filter is mainly composed of three parts: filter container, supporting net basket and filter bag. When the liquid is filtered by the bag filter, the liquid enters from the side of the filter container or the liquid inlet below, and is flushed into the filter bag from the top of the filter bag supported by the mesh basket. The filter bag is evenly distributed on the inner surface of the whole filter bag due to the impact of the liquid and the uniform pressure surface. The liquid through the filter bag is discharged from the liquid outlet at the bottom of the liquid filter along the metal supporting mesh basket wall. (Shanghai Stainless steel bag filter manufacturer) Filter particulate impurities are intercepted in the filter bag to complete the filtration process. In order to keep the liquid filter efficient and smooth and filter accuracy and ensure that the downstream liquid is not polluted, the machine should stop after running for a period of time, open the end cover of the filter, take out the intercepts and filter bags together, and replace the new filter bag. The replacement cycle depends on the actual situation. FY seriesstainless steel bag filteris divided into 1, 2, 3, 4 bag filter according to the size of the filter bag. According to the number of liquid filter bags can be divided into single bag, double bag and multi-bag type; The direction of liquid inlet and outlet is divided into side in bottom out type and bottom in bottom out type, the filter material is high quality stainless steel. Such as 304, 316, 316L, etc. FY series316L stainless steel bag filterhas the characteristics of large capacity, large contaminant capacity, small size, obvious filtering effect, simple operation and low operation cost. (Shanghai Liquid Filter manufacturer)
Filter bag: The imported highly purified filament fiber raw materials are needled, and the surface is treated with special singling to effectively prevent the fiber from falling off and contaminating the filtrate. The fluffy and uniform three-dimensional filter layer has a very high ability to capture solid and colloidal particles. The high strength long fiber makes the filtration efficiency of the filter bag stable and the service life longer. The filter bag is produced according to the European and American international standards, in line with the requirements of GMP and FDA in the domestic pharmaceutical industry. It is an important filter element in the bag filter system (Shanghai liquid filter manufacturer)